KYD-F fluorescence electric endoscope
一、Features
KYD-F fluorescence electronic endoscope is new type inspection equipment with the techniques of ultraviolet irradiation, optics imaging, precision machinery, electronics and micro-camera technology. It utilizes the characteristic that magnetic fluorescence material can light under ultraviolet irradiation. The fluorescent material will be applied to the surface of iron magnetic parts, and then can do inspection in virtue of the fluorescence. It is especially suitable for the inspection of object with shape of board, axle and rod, and furcation, such as welding line, shaft, motorcycle, part, valve, piston, bolt, turning burl, etc. It has two sets of lighting system: white light and UV lighting. The two lighting system can light at the same time, and also can switch each other, to achieve the combining of macro and subtle inspection. It will show the cracks of different direction at the same time and accurately, without miss and need to consider the direction of magnetization. This type endoscope has the characteristics of agility, reclusion high, image clarity, color fidelity and shape accurate. The LCD screen with memory can kinescope the process of inspection. If connect with computer through the USB interface, the image can be captured, freeze, storage, the length or area of the defects can be measured and calculated, and the results will generate reports.
二、Main purposes and the scopes of application
KYD-F fluorescence electric endoscope is especially suitable for the inspection of object with shape of board, axle and rod, and furcation. The surface and near-surface bugs of some medium and small accessory can be checked using it, such as welding line, shaft, motorcycle, part, valve, piston, bolt, turning burl, etc. It has been widely used in the fields of motorcycle, heavy foundry, pressing matrix, natural gas drill pipe, boiler pressure vessel, and so on.
三、Technical parameters
1. Field angle: 95 °
2. Bending angle: up and down, left and right are ≥ 90 °
3. CCD chip: SONY1 / 6", Color, 2lux,
4. Pixels: 47 ten thousand
5. The probe diameter : Φ24mm
6. Insertion tube diameter: Φ16mm
7. Insertion tube length: 0.5~10m
8. The best observation distance: 10 ~ 60mm
9. Lighting: ultraviolet cool light source (brightness can be adjusted at will)
10. Ultraviolet light wave: 360~406nm
11. Display: 8" LCD screen
12. Voltage used: AC 220V±22 V  50 Hz±1 Hz
13. Consecutive working hours: 48 hours
14. Working environment: -20 C° ~ 50 C°
四、The standard configuration
① Endoscope host，one
② 8" LCD monitor, one
③Ultraviolet power supply, one
④ Aluminum alloy equipment box, one

KYD-F荧光型电子内窥镜
一、主要用途及适用范围
KYD-F荧光型电子内窥镜主要被应用在检测各种板材、轴棒类、叉形类。如焊缝、轴、摩托车、零件、气门、活塞、螺栓、转向节等中小零件表面和近表面的缺陷。它目前已广泛地被应用于机车、重型铸造厂、冲压模具、天然气钻杆、锅炉压力容器等许多领域。
二、产品特点
KYD-F荧光型电子内窥镜是集紫外光照射、光学成像、精密机械、电子技术和显微摄像技术与一体的新型检测仪器，它是利用自磁化萤光物质在紫外线照射下发光的性质，将荧光物质涂在铁磁性零件表面上，借助荧光来检测各种轴棒类、叉形类以及板材。焊缝、轴、摩托车、零件、气门、活塞、螺栓、转向节等中小零件表面和近表面的缺陷也会需要用它来检查。它能将不同方向的裂纹同时地和如实地显示出来，不会漏检而且不需要考虑磁化方向。它具有无红外光，被检物体表面温度不会升高, 节能环保，使用时无需灯管预热，瞬时达到100%的高功率，不含有毒物质汞，也不会产生臭氧等特点，检查的全过程可以拍照和录象，先将资料保存在随机配备的SD卡中，离开现场后可通过USB接口与计算机相连，并将检测结果作成报告，能非常方便地对资料进行存档和调阅。
三、技术参数
1.视场角：95°
2.弯曲方向：上、下、左、右均≥90°
3.摄像头： 1/6″彩色 
4.插入管长度：0.5~3m
5.探头直径：Φ24mm
6.插入管直径：Φ16mm
7.像素：45万
8.观察距离：10~60mm
9.照明方式：紫外光冷光源（亮度无级可调）3.5W
10.紫外光波段：360~370nm
11.显示方式：8″液晶监视器
12.工作电压：AC220V±22V  50Hz±1Hz
13.工作环境：-20~50℃
四、产品标准配置   
①内窥镜主机壹台  ② 8″液晶监视器壹台  ③紫外光电源壹台  ④铝合金仪器箱贰只