KYD-E伸缩型电子内窥镜
一、主要用途及适用范围
KYD-E伸缩型电子内窥镜主要被用于某些外部空间受限制、检查部位缝隙狭小并要求有一定的跨度的场合，如特种变压器、锅炉、压力容器、机车、船舶、大型机械、搜救、刑侦、海关等领域。
二、产品特点
KYD-E伸缩型电子内窥镜是专为是集光学、精密机械、电子技术和显微摄像技术与一体的无损探伤、腔体内部检查的新型仪器，它是专为某些外部空间受限制、检查部位缝隙狭小并要求有一定的跨度的场合而设计，通过插入杆的抽拉可以避免长度过长带来的不便，硬性的插入管又可以克服软管平端时出现的不足，它具有短小轻便、操纵灵活、分辨率高、图象清晰、色彩逼真、被检部位形状准确的特点。检查的全过程可以拍照和录象，先将资料保存在随机配备的SD卡中，离开现场后可通过USB接口与计算机相连，并将检测结果作成报告，能非常方便地对资料进行存档和调阅。
三、技术参数
1.使用电压：DC12V 锂电池 12AH 充电次数5000次
2.视向：侧视
3.CCD芯片：SONY 1/6″彩色 2lux
4.像素：47万
5.观察距离：10~300mm
6.插入管展开长度：1~1.5m
7.探头插入所需最小口径：12mm×15mm
8.照明方式：高亮度LED（亮度无级可调）
9.显示方式：3.5″液晶屏（可拍照、录像，SD卡8G内存，USB接口）
10.视场角：95°
11.连续工作时间： 8小时
四、产品标准配置
①内窥镜主机壹台
②便携式电源壹台
③ 3.5″TFT液晶屏壹块
④铝合金仪器箱壹只
KYD-E telescopic electronic endoscope
一、Features
KYD-E telescopic electronic endoscope is new type equipment with the techniques of optics, precision machinery, electronics and micro-camera technology, and devotes to nondestructive inspection and cavity internal inspection. It is designed especially for the occasion that outside space is limited, the inspected part is in narrow gap and request a certain span. The insert pole is hard and can stretch out and draw back, thus can avoid the deficiency of tube and the inconvenience of too long. This type endoscope has the characteristics of short, handy, agility, reclusion high, image clarity, color fidelity and shape accurate. The LCD screen with memory can kinescope the process of inspection. If connect with computer through the USB interface, the image can be captured, freeze, storage, the length or area of the defects can be measured and calculated, and the results will generate reports.
二、Main purposes and the scopes of application
KYD-E telescopic electronic endoscope is mainly used for situation that outside space is limited, the inspected part is in narrow gap and request a certain span. The relative domain includes special transformer, motorcycle, watercraft, large machine, boiler pressure vessel, search and rescue, criminal investigation, the officers, etc.
三、Technical parameters
1. Field angle: 95 °
2. Observation direction: side looking
3. CCD chip: SONY1 / 6", Color, 2lux,
4. Pixels: 47 ten thousand
5. The diameter for insertion tube: 12mm×15mm
6. Insertion pole length (open out): 1m
7. The best observation distance: 10 ~ 60mm
8. Lighting: high-brightness LED (brightness can be adjusted at will)
9. Display: 4" LCD screen (comes with 1 G memory)
10. Voltage used: DC 12 lithium batteries,12AH. Number of charge cycles:5000
11. Consecutive working hours:48 hours
四、The standard configuration
① Endoscope host，one
② Controller, one
③ 4 " LCD screen, one
④ Aluminum alloy equipment box, one